Preparation for the site: Before applying paint, dust, oil, and fungus should be cleaned up properly from the wall of the building. For a new wall, use sandpaper or stone and for the old wall, use a scraper or soap to clean up. Wall should be dried up properly before applying paint to cure.
Step-1: Thin up to 1:1 by adding clean water with A close Sealer. After applying it on wall it will take 2-3 hours to get the wall dried up. A close sealer is applicable for both interior and exterior walls. Per liter coverage is about 170 ft - 180 ft. If there is a chance of salt, then Salt Seal can be applied as an undercoat
Step-2: For covering different flaws or imperfections and ensuring smoothness, use Puttelite Wall Putty or Multipurpose Putty. It will take 3 - 4 hours or 10-12 hours to get the wall dried up.
Step-3: For a smoother finish, Extra 1 coat Aclose Sealer can be used after using wall putty.
Special Note: Stir the paint well before using. Use clean brush and roller for proper application. Tightly close the lid after every uses so that air does not harm the paint. Clean all equipments with water immediately after uses.