Bonntile Texture Paint is a high performance corrosion resistant texture type architectural coating. A three-layer painting system consists of sealer, Texture and Top Coat. Each layer does the individual function makes a highly durable, protective and decorative painting system.
Preparation for the site: Before applying paint, dust, oil, and fungus should be cleaned up properly. For a new wall, use a 120 sandpaper or stone, and for the old wall, use a scraper or soap to clean up. Wall should be dried up properly before applying paint to cure. For newly plastered wall, give about 12 weeks for curing.
Step-1 (Bonntile Sealer): Thin up to 10% by adding clean water with Bonntile Sealer and apply it by Brush or Roller on the wall which will be dried up within 2 hours. If there is a chance of salt, then Salt Seal can be applied as an undercoat. Per liter coverage is about 100 sft
Step-2 (Wall Putty): For covering different flaws and ensuring smoothness, use Puttelite Wall Putty or Multipurpose Putty. It will take 3 - 4 hours or 10-12 hours to get the wall dried up. After that, smoothen the wall by using 220 sandpaper. For a smoother finish, Extra 1 coat Bonntile sealer may be applied.
Step-3 (Texture Coat): Stir thoroughly. It is ready to use paint and does not require extra thinning for our recommended texture designs. It can easily spray by BONNTILE HOPPER GUN on the surface of a building I three-dimensional patterns to choice, heavy, medium, and fine texture. To obtain head-cuts pattern, press down the “mountain” with a roller when the paint is in semi-dry condition (about 15 minutes after application). Per liter coverage is about 100 ft./litre/20 kgs.
Step-4 (Top Coat): Thin up to 50% by adding Bonntile Thinner with Bonntile Top Coat and apply it by Brush or Roller on the wall which will be dried up within 1 hour. After drying up the 1st coat, 2 coats should be applied. Recoating time is 8 hours. For a Smoother finish, Extra 1 coat paint (3 coats) can be applied.Per litre coverage is about 56 ft/litre (upon texture).
Special Note: Stir the paint well before using. Use a clean brush, roller and BONNTILE HOPPER GUN for proper application. Tightly close the lid after each uses so that air does not harm the paint. Clean all equipment immediately after uses.