Preparation for the site: Before applying paint, dust, oil and separated micro dirt or object should be cleaned up properly from wall. For old wall, use a scrapper or soap to clean up. Wall should be dried up properly before applying paint to cure.
Step-1: Thin up to 10% - 15% by adding GP Thinner with plastelite wall sealer (Solvent Based). After applying it on wall it will take 18-24 hours to get the wall dried up. Plastelite wall sealer (Solvent Based) is applicable for both interior and exterior wall. Per litre coverage is about 90 sft - 100 sft. It is applicable only for properly dried wall.
Step-2: For covering different flaws or imperfections and ensuring smoothness, use Puttelite Wall Putty or Multipurpose Putty. It will take 3 - 4 hours or 10-12 hours to get the wall dried up. Then, use light sanding paper to clean up the wall for smoothening
Step-3: For a smoother finish, Extra 1 coat Plastelite wall sealer (Solvent Based) can be used after using wall putty.
Special Note: Stir the paint well before using. Use clean brush and roller for proper application. Tightly close the lid after every uses so that air does not harm the paint. Clean all equipments with water immediately after uses.