Red Oxide Primer is a general-purpose primer based on modified alkyd resin. It has excellent anti-corrosion properties. It is used in steel and iron structures
Preparation for the site: Before applying paint, Use 120 emery paper to remove dust, oil from the wall, and clean up the surface. The surface should be dried up properly before applying paint to cure.
Step-1: Thin up to 10-15% by adding thinner with Victory U Anti Corrosive Red Oxide Primer. After applying it on the surface. It will take 18-24 hours to get the surface dried up. Victory U Anti Corrosive Red Oxide Primers applicable for both interior and exterior of steel and iron structures. Per litre coverage is about 138 sft - 179 sft.
Step-2: For a smoother finish, Extra 1 coat Victory U Anti Corrosive Red Oxide Primer can be applied.
Special Note: Stir the paint well before using. Use clean brush and spray for proper application. Tightly close the lid after every uses so that air does not harm the paint. Clean brush and all other equipments with thinner immediately after uses.