Widely used Elite Marine paint is based on high quality alkyd resin .It is highly bright, smooth, and it is highly resistance to rust and adverse weather. Elite Marine paint is specially used on wood work & metal work, especially useable for inside and outside of ship.
Preparation for the site: Before applying paint, use thinner to clean up oily and greasy matter from specific place properly. Then Use 120 emery paper, wire brush or grinder machine to remove old paint, rust and separated dust layer. Grit or sand blasting is very effective to clean for iron or steel surface.
Step-1: For iron or steel surface, use Anti Corrosive Red Oxide primer and for wooden surface, use synthetic undercoat as primer. Give 18 - 24 hours for dried up.
Step-2: Thin up to 10% - 15% by adding Thinner T-1 with Elite Marine paint. For a smoother finish, 2 coats of thinner mixed Elite Marine paint can be applied. Then give 18 - 24 hours in each coat. Per litre coverage is about 150 sft - 170 sft.
Special Note: Use clean brush, roller and spray for proper application. Clean brush, roller and all other equipments with thinner immediately after uses. Use mixed paint immediately. Again mix the paint during the time of applying 2 coats. Use gloves, eyeglass for safety.