Lucky 7 is based on high-quality alkyd resin and offers several desirable properties that make it a popular choice for various applications. It has good adhesion properties and adheres well to surfaces like wood, metal, concrete, and masonry.
 
Preparation for the site: Use 120 sandpaper or emery paper to remove dust, and oil, from the wall and clean up the surface.
 
Step-1: The application of the sealer is dependable completely on the surface. Anti-Corrosive Red Oxide is used as a primer subject to metal and iron surfaces. Use Plastelite Wall Sealer (solvent-based) for the wall and take 18 - 24 hours for dried up.
 
Step-2: For covering different flaws and ensuring smoothness, use Puttelite Wall Putty slightly only for the wall. After using wall putty on the wall, Plastelite Wall Sealer (solvent-based) is used for one more after 4-6 hours.
 
Step-3: Thin up to 10% - 15% by adding Thinner T-1 with 1 litre Lucky 7 super gloss synthetic enamel paint. For a smoother finish, 2 coats of thinner mixed Lucky 7 paint can be applied. Then give 18-24 hours between each coat. Per litre coverage is about 150 sqft - 170 sqft.
 
Special Note: Use a clean brush and spray for proper application. Clean all equipment with thinner immediately after use. Tightly close the lid of the container if mixed paint is not used.